| Construction: | Valve Seal is provided with double construction of 100% PTFE core with spiral wrapping of PTFE tape. |
| Application: | The core fills all voids and confirms to uneven spindles and flanges while the spiral wrapping of PTFE tape prevents extrusion at both ends of the spindle. It is widely recommended for use on valves in various industries for obtaining practically Zero Leakage. Can also be used in place of gasket in flanged joint. |
| Installation: | Installation Detail |
| Standard Packing: | 3 mm - 15 mts. | 4 mm - 10 mts. 6 mm - 5 mts. | 8 mm - 5 mts. 10 mm - 3 mts. | 12 mm - 2 mts. |
| Service Parameters: |
Temp.
|
pH |
Pressure |
Velocity |
�
C |
Range |
Kg/cm2 |
Mtrs/sec |
|
-100
to 260 |
0-14 |
200 |
-- |
| Construction: | Braided packing made from a special grade of PTFE inbuilt with an inert high temperature lubricant. |
| Application: | This is a non toxic, chemically inert and self lubricating packing. Due to its chemical inertness it can be used against almost all media. Widely used in rotating and static applications. Excellent packing for use in food processing, pharmaceutical and chemical industries, etc. |
| Standard Packing: | 6mm - 45mm. |
| Installation: | Installation Detail |
| Service Parameters: |
Temp.
|
pH |
Pressure |
Velocity |
�
C |
Range |
Kg/cm2 |
Mtrs/sec |
|
-240
to 260 |
0-14 |
75 |
5 |
| Standard Packing: |
3mm to 5mm
|
6mm to 14mm |
16mm to 19mm |
Above 19mm |
1/2 kg |
1kg |
2kg2 |
5kg |
| Construction: | High tensile yarn made from a special grade PTFE, impregnated with PTFE dispersion and lubricated with inert high temperature lubricant. |
| Application: | This packing has particular characteristics such as low coefficient of friction and excellent tightness, making it suitable for rotary, reciprocating and static applications. It is widely used in all type of industries where purity and safety are vital criteria, such as food processing, pharmaceutical, chemical industries, etc. |
| Standard Packing: | 3mm - 45mm. |
| Installation: | Installation Detail |
| Service Parameters: |
Temp.
|
pH |
Pressure |
Velocity |
�
C |
Range |
Kg/cm2 |
Mtrs/sec |
|
-200
to 260 |
0-14 |
100 |
8 |
| Standard Packing: |
3mm to 5mm
|
6mm to 14mm |
16mm to 19mm |
Above 19mm |
1/2 kg |
1kg |
2kg2 |
5kg |
| Construction: | High tensile yarn made of special grade PTFE and impregnated with PTFE dispersion. |
| Application: | This packing is mainly recommended where lubricant is not to be used due to danger of combustion. It is also used in pumps having low shaft speed and equipments in handling hazardous & corrosive chemicals. PTFE being chemically inert, can be used with almost all chemicals. |
| Installation: | Installation Detail |
| Available SIze: | From 3mm to 45mm. |
| Service Parameters: |
Temp.
|
pH |
Pressure |
Velocity |
�
C |
Range |
Kg/cm2 |
Mtrs/sec |
|
-200
to 260 |
0-14 |
100 |
5 |
| Standard Packing: |
3mm to 5mm
|
6mm to 14mm |
16mm to 19mm |
Above 19mm |
1/2 kg |
1kg |
2kg2 |
5kg |
| Construction: | This is a specially developed packing made of 100% pure PTFE unsintered tape. |
| Application: | It is a cost-effective replacement of PTFE impregnated asbestos packings. PTFE 100% square packing is a self-lubricating, chemically inert, non-toxic, and a non-hazardous material. It is very flexible packing and provides more efficient sealing with very low friction characteristics. This packing can be used against corrosive chemicals, solvents, oils and petroleum by products and oxygen service widely used for water handling equipments, liquid oxygen pumps, valves etc. |
| Installation: | Installation Detail |
| Available Size: | From 6mm to 25mm |
| Service Parameters: |
Temp.
|
pH |
Pressure |
Velocity |
�
C |
Range |
Kg/cm2 |
Mtrs/sec |
|
-100
to 260 |
0-14 |
50 |
5 |
| Standard Packing: |
6mm to 14mm |
16mm to 19mm |
Above 19mm |
1kg |
2kg2 |
5kg |
: 
: 
